7kg DALTEX UVR Bound Plus Resin

7kg Daltex UVR Bound Plus Resin

7kg DALTEX UVR Plus Resin is a solvent-free, two-part aliphatic polyurethane kit developed specifically for creating high-quality UV-resistant resin-bound surfaces.

DALTEX UVR Plus Resin is perfect for a variety of residential or commercial resin bound systems, including private driveways, paths and patios, as well as public car parks, forecourts or walkways.

DALTEX UVR Plus Resin - 7.0kg: Recommended Mix Design

Our recommended mix design for the 7.0kg kit is:

• 75kgs 2-5mm
• 25kgs 1-3mm
• 6.25kgs of sand

       Total 106.25kgs

% resin 6.6% - Coverage approximately 4.0m2 at 15mm and 3.55m2 at 18mm.

DALTEX Installation Guidance

Catalyst

We recommend the use of an accelerator/catalyst to ensure even, consistent curing at temperatures below 15°C. 

Installation Should Not Proceed If: 

• The relative humidity is outside the range of 30%-85%.
  
  
• The surface temperature is less than 3 degrees above the dew point of the measured air temperature and relative humidity.
  
  
• The operating temperature and road surface temperature and/or air temperature are outside the range of 10 degrees to 30 degrees.

For further information and detailed steps on the full resin bound installation process, please consult our Resin Bound Advisory Notes.

This product is only recommended for use by an experienced installer and not for DIY purposes. 

Training is recommended prior to use.

DALTEX: The number one brand for Resin Bound in the UK

Derbyshire Specialist Aggregates is the UK's leading manufacturer of dried aggregates and is the home of DALTEX, the UK’s number one brand in Resin Bound. 

Our commitment to product quality and customer service, backed up by over 35 years of experience, means DALTEX products are trusted and used by professional resin bound contractors and specifiers nationwide.  

• DALTEX UVR Plus Resin is colour stable and will not unduly alter the aggregate base colour, which is especially important for lighter aggregate colours.
  
  

• A DALTEX UVR Plus Resin Bound system is SUDS compliant which means it does not require planning permission (providing the sub-base on which it is laid is porous or a suitable soakaway exists).
  
  

• We guarantee that Daltex UVR Resin is made from the highest quality raw materials and manufactured in the UK. 
  
  

• Daltex UVR Resin is a solvent-free aliphatic polyurethane resin and has been specifically formulated for resin bound. 
  
  

• The resin contained within the Daltex System has been independently assessed and meets with the requirements of a 1.1: 1 ratio Part A and Part B system. 
  
  

• Daltex UVR is over-indexed by up to 40% over competitor products giving superior strength and durability. 
  
  

• DALTEX UVR Plus Resin is supplied as a two-part kit that is easy to use.
  
  

• DALTEX UVR Plus Resin quickly establishes excellent tolerance to moisture and can withstand heavy foot traffic in as little as 24 hours.
  
  

• The Daltex UVR Resin Bound System is produced to the highest quality standards and has been researched and independently tested in laboratory and real-life applications to ensure strength, workability and performance. 
  
  

• We guarantee that the colour of the polyurethane resin will not change when installed and are happy to provide a 15 year guarantee with the DALTEX UVR Resin Bound System (product only, installation excluded)* (Conditions apply please contact us for further details)