Daltex Beige

1-6mm
From£8.31 Exc VAT£9.97 Inc VAT
Standard Bag
Standard Bag
£8.31 (EXC VAT)
£9.97 (INC VAT)
40 bags to a pallet
Total price
£0.00
Exc VAT
£0.00
Inc VAT
Delivery charges will be added in the basket
We also sell resin

— Or —

Daltex Beige 1-6mm is a beige and cream angular marble perfect for those wanting a lighter finish. 

This aggregate can be used on its own or mixed with other colours. It is often used to lift other multicoloured gravels to give a lighter, subtle finish. Daltex Beige is not suitable for resin bonded applications.

We strongly recommend the use of UVR resin with all DALTEX dried aggregates.

Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.

Please Note: DALTEX Beige 1-6mm is a direct replacement for DALTEX Beige 2-5mm however to ensure batch consistency we advise not to mix old stock DALTEX Beige 2-5mm with DALTEX Beige 1-6mm.

Hardness - 3

PSV  - 

AAV - 32

AIV - 31

ACV - 30

PSV - Polished Stone Value
The PSV of an aggregate is a measure of the resistance of an aggregate to polishing and the value is established by subjecting the aggregate to a standard polishing process and then testing the aggregate with a portable skid resistance tester. Aggregate that has a PSV over 60 is regarded as a High Skid Resistant Aggregate. The higher the PSV figure the greater resistance the aggregate has to polishing.

AAV - Aggregate Abrasion Value
A known mass of aggregate chippings are set in resin in a small test panel and subject to abrasion on a grinding apparatus. The loss in weight of the aggregate after a specified time as a percentage of the original weight is the AAV.

AIV - Aggregate Impact Value
The aggregate impact value is a strength value of an aggregate that is determined by performing the Aggregate Impact Test on a sample. The AIV is the percentage of fines produced from the aggregate after subjecting it to a standard amount of impact. Below 10 would be regarded as strong, above 35 would normally be regarded as too weak to be used in road surfaces.

ACV - Aggregate Crushing Value
The aggregate crushing value is a value which indicates the ability of an aggregate to resist crushing. The lower the figure, the stronger the aggregate ie the greater its ability to resist crushing.

Suggested mix design for Daltex Bound UVR kit - 6.5kg

Suggested coverage 3.13m² @ 18mm depth

  • 3 x 25kg bags Daltex 2-5mm
  • 1 x 12.5kg bag Daltex 1-3mm
  • 1 x 6.25kg bag of sand

Total 93.75kg - %resin 6.93%

Suggested mix design for Daltex Bound UVR plus kit - 7.5kg

Suggested coverage 3.55m² @ 18mm depth

  • 3 x 25kg bags Daltex 2-5mm
  • 1 x 25kg bag Daltex 1-3mm
  • 1 x 6.25kg bag of sand

Total 106.25kg - %resin 7.06%

Resin Bonded 2 part kit

Coverage min 1.5kg per m²
Coverage max 2.5kg per m²

Back to top
Connect with Us