Base Build-up Course - Asphalt
Typical Base Build Up – Private Driveways / Paths / Patios
It is important to understand the base that you are working with before planning your Resin Bound system. This guide is to help you understand the Asphalt base course.
This base course is permeable and therefore SUDS compliant
The purpose of this base course is to provide an attractive, durable and seamless natural stone or gravel finish.
This is an aesthetically pleasing and strong surface which allows water to pass through the surface. It is also easy to clean and maintain.
- Resin Bound can be overlaid onto existing concrete or asphalt surfaces of suitable construction for the traffic expected.
- Joints of cracks should be broken out to a minimum of 200mm width and filled in with a well compacted macadam or concrete base layer (see above diagram).
The specification is based on normal good practice for flexible surfacing and does not absolve the specifier from designing a construction suitable for the expected traffic and ground conditions pertaining on a given site. Areas that may be heavily trafficked by heavy vehicles should have structure layers designed according to DoT requirements.
The thickness of the sub base layer required is dependent on sub grade soil condition.
The details given in this specification are intended only as a guide. Actual details should be developed by the project designers taking into account the specific circumstances of the intended application. Derbyshire Specialist Aggregates assumes no responsibility for improper reliance upon or misuse of the data herein. Product design and specification are subject to change with further notice.